南澳電氣NAEF-H全自動仿真型互感器現場校驗儀采用獨特電路和DSP技術結合，徹底解除阻容移相電路不穩定的問題，用于PT、CT的誤差及阻抗、導納測試。滿足JJG313-94《測量用電流互感器檢定規程》和JJG314-94《測量用電壓互感器檢定規程》的要求。

 南澳電氣（武漢）有限公司（簡稱“南澳電氣”)，是國電網武漢高壓研究所改制后成立的高電壓輸變電檢測設備的高新骨干企業，主要從事電力儀器儀表、交直流分壓器、互感器類測試設備、高壓耐壓設備、峰值電壓表、超聲局放定位系統、工頻信號發生器、沖擊電壓電流發生器 、變壓器類試驗設備、繼電保護測試儀、SF6及開關類檢測設備、局部放電超聲檢測系統、避雷器測試設備、環境人工氣候模擬實驗裝置、電能表校驗設備、蓄電池檢測儀等產品的研發。

NAEF-H Automatic Simulator Transformer Test Equipment  南澳電氣NAEF-H全自動仿真型互感器現場校驗儀

產品簡介

南澳電氣NAEF-H全自動仿真型互感器現場校驗儀用于PT、CT的誤差及阻抗、導納測試。滿足JJG313-94《測量用電流互感器檢定規程》和JJG314-94《測量用電壓互感器檢定規程》的要求。

南澳電氣NAEF-H全自動仿真型互感器現場校驗儀產品別名

互感器校驗儀，互感器檢定裝置

南澳電氣NAEF-H全自動仿真型互感器現場校驗儀產品特性

1、南澳電氣NAEF-H全自動仿真型互感器現場校驗儀

采用320×240點陣液晶，可視范圍大，帶長壽命背光照明，方便使用

2、中英文操作界面，界面美觀

3、百分表、比差、角差采用特大字體顯示，方便用戶觀測

4、本公司生產的仿真型互感器現場校驗儀完全滿足JJG314-1993和JJG314-1994要求，自動采樣

5、自動判斷性錯誤，變比錯誤

6、上位機軟件具有虛擬儀器開放功能

7、徹底解決S級測量問題

8、自動切換量程

9、南澳電氣NAEF-H全自動仿真型互感器現場校驗儀

采用獨特電路和DSP技術結合，徹底解除阻容移相電路不穩定的問題

10、功耗：＜15VA(不帶微型打印機)

          ＜25VA(帶微型打印機)

11、諧波抑制比：＞40db

12、外形尺寸(長×寬×高)：260×350×150mm3

13、重量：6kg

南澳電氣NAEF-H全自動仿真型互感器現場校驗儀產品參數

1、設備使用環境

  1)溫度：5℃～40℃；相對濕度：<80%(25℃時)  

    海拔高度：<2500m

    電源頻率：50Hz±0.5Hz；電源電壓：220V±5V

  2)測量范圍：

    同相分量(%)：0.0001～200.0；分辨率：0.0001

    正交分量(分)：0.001～700.0；分辨率：0.001

    阻抗(Ω)：0.0001～20.0；分辨率：0.0001

    導納(ms)：0.0001～20.0；分辨率：0.0001

  3)基本誤差：

    同相分量：ΔX=±(X×2%＋Y×2%)±Dx(有1級可選)

    正交分量：ΔY=±(X×2%＋Y×2%)±Dy(有1級可選)

              “X”、“Y”——儀器的顯示值

              “Dx,Dy”——儀器的量化誤差

               Dx=2，Dy=5

  4)百分表：2級(有1級可選)

2、工作范圍：

  1)電流：(1%～149%)In (In =)

          (5%～149%)In (In =1A)

  2)電壓：(5%～149%)Un (Un =100V，150V，100V/)

          (5%～149%)Un (Un =100V/3)

3、工作負荷：

  1)電流：TO對TX＜0.12Ω cosΦ=1

  2)電壓：a對x＜0.25VA (100V)

4、性錯誤指示

當工作電流(電壓)達到額定電流(電壓)的5%以上，誤差超過180%時，應有性指示。

注意：如果大于額定工作電流(電壓)的10%以上，仍未出現應有的性指示，說明有故障，請不要再增加電流(電壓)，以免燒壞儀器。

5、變比錯誤指示：

當工作電流(電壓)達到額定電流(電壓)的5%以上，誤差超過30%而小于180%時，應有變比錯誤指示。

6、緣和耐壓試驗及說明：

  電源插座對外殼能承受1.5kV，一分鐘耐壓。

 

Product introduction

NAEF-H Simulator Transformer Test Equipment specilized for testing PT, CT error and the impedance, admittance test. Meet national JJG313-94 "Measuring Current Transformer test procedures" and JJG314-94 "Measuring voltage transformer test procedures" requirements.

Also called name

Transformer calibrator, transformer test equipment

The Characteristics of the products

1, Uses 320 x 240 dot matrix LCD, visible range, with a long-life backlight, easy to use

2, Entire English operation interface, attractive interface

3, Dial indicator, ratio difference, angle difference using large font display, easy to observation

4, Company's simulation-type transformer field calibrator fully meet JJG314-1993 and JJG314-1994 requirements, automatic sampling

5, Automatically determine the polarity of the error, the error ratio

6, PC software with virtual instruments open function7, S-Class solve measurement problem

8, Automatic switching range

9, Using unique circuitry and advanced DSP technology combine to completely remove the RC phase shifter circuit instability

10, Power consumption: <15VA (without micro-printer); <25VA (with micro-printer)

11, Harmonic rejection ratio:> 40db

12, Dimensions (L × W × H): 260 × 350 × 150mm3

13, Weight: 6kg

The parameters of the products

1 , Working environment

  1 ) Temperature : 5 ℃ ~ 40 ℃; Relative humidity : <80% (25 ℃ when )

    Altitude : <2500m

    Power frequency : 50Hz ± 0.5Hz; Supply voltage : 220V ± 5V

 2 ) Measuring range:

    Phase component ( % ) : 0.0001 ~ 200.0 ; Resolution : 0.0001

    Quadrature component ( stars ) : 0.001 ~ 700.0 ; resolution: 0.001

    Impedance (Ω): 0.0001 ~ 20.0; Resolution : 0.0001

    Admittance (ms): 0.0001 ~ 20.0; resolution: 0.0001

 3 ) Basic error:

    Phase component : ΔX = ± (X × 2% + Y × 2%) ± Dx ( with an optional )

    Orthogonal components : ΔY = ± (X × 2% + Y × 2%) ± Dy ( with an optional )

              "X", "Y" - the instrument display

              "Dx, Dy" - the quantization error of the instrument

               Dx = 2, Dy = 5

  4 ) dial indicator : level 2 ( level 1 available )

2, Scope of work:

 1 ) Current : (1% ~ 149%) In (In = )

          (5% ~ 149%) In (In = 1A)

  2 ) Voltage : (5% ~ 149%) Un (Un = 100V, 150V, 100V /)

          (5% ~ 149%) Un (Un = 100V / 3)

3, Working load:

  1 ) Current : TO right TX <0.12Ω cosΦ = 1

  2 ) Voltage : a pair of x <0.25VA (100V)

4 , Wrong polarity indication

When the operating current ( voltage ) reaches the rated current ( voltage ) of more than 5% error for more than 180 %, the proper polarity indication .

Note: If greater than the rated operating current ( voltage ) more than 10% , should not appear polarity indication , there is a fault , please do not increase the current( Voltage ) , so not to start the instrument .

5 , Ratio error indication :

When the operating current ( voltage ) reaches the rated current ( voltage ) of more than 5% error of more than 30% but less than 180% , the proper ratio error indication.

6 , Insulation and pressure test and description:

  Terminal TX () terminals connected

  Power outlet on the casing can withstand 1.5kV, 1 minute pressure

本頁產品地址：http://m.521uz.com/sell/show-7349024.html