銷售威格士方向控制閥/美國VICKERS方向控制閥
電氣接線通過一個工業用標準的 7 針插頭。
工廠設定調整保證閥與閥之間有很高的再現性。
(除 HJ 型外所有線圈,見位置
FTW= 同 “FW”,加端子板
FJ = 接線盒內飛線,螺紋
FTJ = 同 “FJ”,加端子板
P = 插入式線圈 (僅 “H”型)
If the flow through the pilot valve is reduced (by reducing the electromagnetic
Iron command current), then the main spool force balance again
Is broken and the main spool moves down to reduce the narrow slot area
And reduce the flow into the upper chamber until the restoring force is balanced.
All valves have a "zero leakage design", which is a move
The main design features of the valve. This type of valve has a plate
Installation and insert type. The latter requires a valve body with
Special processing of the cavity (see cavity map and special tool notes).
銷售威格士方向控制閥/美國VICKERS方向控制閥
電磁控制閥 ASI 連接開關, 用于額定電流為 2A
額定電壓為 24V DC (8 至 38W) DIN 43650
線圈連接可安裝在單或雙電磁控制閥上
當額定流量為 1 L/min (0.26 USgpm)
40 = 2-40 bar (29-580 psi)
100 = 3-100 bar (44-1450 psi)
160 = 4-160 bar (58-2300 psi)
250 = 5-250 bar (73-3625 psi)
350 = 6-350 bar (87-5000 psi)
U = ISO 4400 (DIN 43650)
FW = 接線盒內飛線,螺紋孔

Open the pilot throttle (Figure 2) to lower the cavity (3)
Pressure, so that the main spool away from its seat movement. This makes it narrow
Slot the throttled edge (7), open the variable damping port and make it
The flow passes through the co
ntrol loop. Initially, through the pilot valve
The flow rate is equal to the flow through the narrow slot plus the main spool
Turn on the movement and discharge the traffic.
銷售威格士方向控制閥/美國VICKERS方向控制閥本頁產品地址:http://m.521uz.com/sell/show-4113234.html