可程序-太陽能板-熱循環試驗機--系統規格表
Programmable PV(Thin-Film) Thermal Cycling Tester

Model

PV-Thin-Film- 8-CP-SD

外型尺寸
Exterior dimension

485 * 600 * 600 mm (W*H*D)(包含突出部份)

標準Channel
Standard Channel

1 Channel / 模塊 / 300W (每臺8 channel)
1 channel / module / 300W (max 8 channel/set)

zui大控制模塊數量
Maximum control Module

8模塊 / 2.4KW
8 module / 2.4KW

設定方式
Method of Test setting

以Channel設定為單位 (開始/停止) 每Channel獨立控制,可設定不同電壓與電流
Set Channel (start/stop) ; each Channel single control ,can set different Voltage & Current

Channel輸出電壓/電流范圍
CH. Output volt/current range

AC 0~150V/ 0~2000mA(0.1V/1mA/Step) / channel

操作模式
Operation mode

定電壓/定電流 切換模式
CV/CC Switch Mode

數據取樣速度與通訊界面
sample rate & com interface

1Sec~59:59mm:ss (Sample to Controller) , 5sec (Sample to PC) & RS485 or RS232

Continuous Mode
ON-OFF Mode

可選擇連續輸出
可選擇ON-OFF脈波設定(0~59,59mm:ss), cycle設定功能(10位數)

電壓/電流 設定/zui大試驗時間
Voltage/Current Setting / Max test time

測試電壓與電流---(電壓與電流設定 正電壓與電流 設定) / 9999.9Hr
Test Volt.& current –(setting of bias positive volt/current /test positive volt/current setting)/9999.9Hr

數據讀取&連結臺數
Data reading & link number of machines

同時讀取/ 記錄各channel電壓/電流 值/溫度/chamber溫濕度值 多32臺
read /record value of the voltage & current & temp. of channel and T/H values of each Chamber /max 32 Set

輸出準確度與表頭分辨率
Output & indicator

1%±2mA & 0.1V/1mA

電壓/電流 值 轉換圖形曲線
Voltage / Current values Conversion curve

記錄電壓與電流與溫度值可轉換為圖形曲線
record the voltage and current &Temp. values of each Channel can convert the Curve

電壓/電流/板溫 分析
Voltage /Current/Temp. Analysis

記錄 電壓/電流/溫度 開始/取樣/結束時間
Recording of the start /sample/ end time of voltage/ current/ temp.

EXCEL報表轉換
Excel report conversion

條件設定數據,量測數據,電壓短路數據轉換成EXCEL檔案
Set condition data, measurement data and voltage shortage data converted as Excel file

電源
Power Source

AC 220V/25A , 50/60Hz