產品整理： 

型號：WYE系列 

產品名稱:溫控器、調溫器thermolator

產品關鍵詞:溫控器，溫度控制開關，機械式溫度控制器，液體膨脹式溫度控制器

           Thermostat, Thermostat switch,mechanical temperature controller,

           Liquid expansion temperature controller

行業及產品類目: Home appliance-Home appliacce parts

產品簡要描述及:

1、電氣性能：16A-250V/AC

2、斷開溫度：根據用戶的要求，溫度設計范圍(-35℃～+320℃)

3、產品壽命：>10萬次

4、主體zui高耐溫：150℃

Specification

1.Electrical performance:16A-250V/AC

2.Temperature range: -35℃～+320℃

3.Diff: according to the customer requirement.

4. Life: >100,000 times

5.Side of body: 150℃

產品詳細描述:

一、原理性能和用途
原理性能：當被控制對象的溫度發生變化時，溫控器感溫部?jī)?nèi)的工質產生相應的熱脹冷縮的物理現象（工質體積變化），與感溫部連通一起的膜盒產生膨脹或收縮。通過杠桿原理，帶動開關通斷動作，達到恒溫目的。WYE系列液脹式溫控器具有控溫準確，穩定可靠，開停溫差小，控溫調節范圍大，超載電流大等性能特點。
用途：主要用于家電行業（淋浴器、滾筒式洗衣機、暖風機），電熱設備（不銹鋼全自動開水器、嵌入式電烤箱、電熱油炸鍋、食品機械、醫療設備），制冷行業（廚房冷柜、保鮮柜、冷庫、制冰機、魚池、冷飲機、暖氣機）等控溫用。

Principle of performance andApplication

When the temperature of the controlled object is changed,the inner

workingsubstanceof thermostatsensible bulb  produce a corresponding

thermal expansion and contraction physical  phenomenon (theworking substancevolume change), at which connected withthe diaphragm of sensible bulb

produceexpansion or contraction.Through the leverage to drive switch

on/off action, the purpose is to achieve constant temperature.F2000/A2000 series thermostats have temperature control accurate, reliable,  

smalldifferential, temperature adjustmentrange, and large overload

current performance characteristics.

Usage: to beapplied to home Appliances industry(shower bath fitting、

tumbling-box washing machine, fan heater),electrical heating

appliance(Stainless steel automatic water boiler,built-in electric oven,

frying pan, food machinery, armarium,),Refrigeration industry(kitchen

refrigerator,chiller,cold Storage,ice maker,fishpond,Beverage

Machine, heater)for temperature control use.

二、注意事項：
1、用戶必須根據自己產品的特點，所需控制的溫度，提出訂貨型號和規格。
2、溫控器安裝時，感溫管盡可能整支貼緊被控溫表面，以達到控溫準確的目的。
3、安裝時不可將感溫管壓變形，以免影響其性能。
4、勿使導電氣體或?qū)щ娢镔|(zhì)進入溫控器內或污染溫控器表面以免影響電氣緣性能。
5、安裝支架的M4機絲不要過長，否則會破壞溫控器性能。
6、開關盒是電器陶瓷件要輕拿輕放，避免破壞。
7、毛細管折彎半徑不能小于5mm.

Attentions

1,The client must be based onthe characteristics of their products,what needed the temperature controlling, brought forward the type and specification ordering goods

2, The whole bulb is supported closely alignscontrolled temperature

surfacewhile thermostat installation, to achieve accurate

temperature control purposes.

3, The installation must not be a bulb pressure deformation, so as not

to affect its performance.

4,Don't make electricity gas and electricity material in a thermostat   

or contaminated thermostat surface to avoid affect the electrical

insulating performance.

5, The M4 screw of mounting brackets is not too long, otherwise it

will damage thermostat performance.

6,Switch box is that the electrical appliances ceramic part to handle    gentlyand avoid damage

7, The bending radius of capillary is not less than 5mm.

三、說明
1、轉軸尺寸規格及其起始旋轉角度需依客戶之需求來設定
2、其跳脫溫度及其特性曲線需依客戶成品與溫控匹配測試而定
3、端子尺寸規格和方向多種多樣，毛細管和護套管長度可隨客戶任意選擇
4、為方便客戶安裝溫控器，溫控器中還可焊接不同的直徑的感溫包

Third, note
1, The shaft sizes and rotation angles are to be set according to customer  

Demand.

2, The off temperature and characteristic curve aredefinite according to matching test the temperature control with customer finished product

3,The client canarbitrarilychoose differentdimension specification and direction of terminal、the length ofcapillary and protective tube.

4,For the convenient client assembles the thermostat,It can be welded  

in the bulb of different diameter.