ZY6034B低溫卷繞試驗裝置
Winding test device at low temperature
低溫卷繞試驗裝置試驗標準：符合GB2951.4-2008、GB2099-94、VDE0472和IEC884-1等標準，與低溫箱配合使用。
Winding in low temperature test device test standard: in accordance with, GB2099 GB2951.4-2008-2008, VDE0472
and IEC884-1 standard, used with low temperature box.
適用范圍：用于考核測定圓形電纜或圓形緣線芯在低溫狀態下的性能。
Scope of application: used for assessment of the measurement cable or round insulated wire core in the
performance of the low temperature condition.
主要參數： The main parameters:
1、低溫卷繞試樣直徑：Ф2.5～Ф12.5mm
2、卷繞棒直徑：Ф2～Ф38mm共12支
3、過線套：Ф3.5，6，12，16mm各二件
4、試樣纏撓圈數：2～10圈
5、外部與手動搖輪連接
配12根棒，分別為2mm，4mm，6mm,8mm，12mm,17mm，6.5mm，12.7mm,19mm,25.4mm，31.8mm,38mm
6.體積：27×25×25cm（長寬高）
1, low temperature winding sample diameter: 2.5 ~ 12.5 mm Ф Ф
2, winding bar diameter: 2 ~ Ф Ф 38 mm, a total of 12
Line 3, a set of: Ф 3.5, 6,12,16 mm 2 pieces of each
4, sample around scratching turns: 2 ~ 10 laps
5, external and shake hand wheel connection
With 12 bar, respectively is 2 mm, 4 mm, 6 mm, 8 mm, 12 mm, 17 mm, 6.5 mm, 12.7 mm, 19 mm, 25.4 mm, 31.8 mm
and 38 mm
6. Size: 27 * 25 * 25 cm (dimensions)
本頁產品地址：http://m.521uz.com/sell/show-4367541.html
免責聲明：以上所展示的[ZY6034B 低溫卷繞試驗裝置]信息由會員[東莞中諾臺灣質檢儀器設備有限公司]自行提供，內容的真實性、準確性和合法性由發布會員負責。
