ZY6016加熱變形試驗機
Heat deformation testing machine
本機用來測試塑料及電線皮等材料的熱變形程度。特定溫度下，將試件于試驗機內自由置放30分鐘后，再夾在本機平行板間，加規定之荷重，同溫度再置放30分鐘，用量表量取其加熱前后之厚度差，該厚度差除以加熱前厚度，即為變形率。符合UL1581、GB2099標準
This machine is used to test the plastic and the thermal deformation of the wire material such as leather. Under certain temperature, the specimen in the testing machine free placed within 30 minutes, and then sandwiched between the machine between parallel plates, and of the load, implantation with temperature for 30 minutes, with a scale measuring the thickness difference of before and after heating, the thickness difference divided by the thickness, before heating is the deformation rate. UL1581, GB2099 standard
試驗裝置：3組
溫度：常溫~300℃
砝碼：50、100、200、500、1000g各三個
量表：日本MITOTOYO 0.01/10mm
體積：內箱尺寸：長600mm*深400mm*高360mm
外箱尺寸：長1100mm*寬620mm*高1730mm
內箱材質：SUS#304不銹鋼。
外箱材質：1.5mm鋼板,采用靜電烤漆
保溫材質：高密度石棉
重量：113kg
Test unit: 3 groups
Temperature: room temperature to 300 ℃
Jordan farmar: 50, 100, 200, 500, 1000 g each three
Scale: Japan MITOTOYO 0.01/10 mm
Size: inner carton size: 600 mm * 400 mm * 360 mm high
Carton size: 1100 mm * 620 mm * 620 mm wide
In case material: SUS# 304 stainless steel.
Material: in the case of 1.5 mm steel plate, adopting electrostatic painting
Thermal insulation material: high density of asbestos
Weight: 113 kg
本頁產品地址：http://m.521uz.com/sell/show-4366070.html
免責聲明：以上所展示的[ ZY6016 加熱變形試驗機]信息由會員[東莞中諾臺灣質檢儀器設備有限公司]自行提供，內容的真實性、準確性和合法性由發布會員負責。
