ZY6505滅火器振撞試驗機測試儀裝置
Fire extinguisher vibration tester tester device
1、型號：ZY6505Model: ZY6505
2、符合標準:Conform to the standard:
GB4351.1-2005《手提式滅火器 第1部分結構和性能》
GB4351.1-2005 portable fire extinguisher Part 1, structure and performance,
3、適用范圍:Scope of application:
適用于1~8kg手提式滅火器的振撞試驗
Suitable for 1 ~ 8 kg portable fire extinguisher of vibration test
4、主要性能參數：The main performance parameters:
1、整機主要由試驗臺，滑輪，鋼絲繩、氣缸、電磁閥、試件夾具、試驗杯、電氣控制系統等組成
2、跌落高度可調：將鋼絲繩固定在試件夾具上，通過滑輪與氣缸相連，調整鋼絲繩的長度，即可調整跌落高度。
3、設計合理、操作簡單：通過氣動元件，電磁閥控制氣缸拉動鋼絲繩從而完成滅火器升起，跌落時，氣缸快速伸出，鋼絲繩
變松時即可完成一次跌落。
4、振撞次數可設定：采用進口氣動元件，氣缸往復運動從而完成振撞性能試驗；系統可設定振撞頻率、振撞次數。
5、zui大載重：zui大負荷50kg
6、振撞頻率范圍：0-1Hｚ（1次/秒）
7、進氣壓力：0.1～0.2 Mpa
8、振撞次數：0~999次可設定，到達設定次數自動停止。
9、供電電源：AC220V 50HZ 0.5kw
10、外形尺寸：長×寬×高（單位mm）=1000×500×1130
1, the machine is mainly composed of test-bed, pulley, wire rope, cylinder, solenoid valve, jig, test
specimens cup, electric control system, etc
2, dro height adjustable: wire rope fixed on the specimen clamp, through the pulley connected to the
cylinder, adjust the length of the wire rope, can adjust the dro height.
3, reasonable design, simple operation, through the pneumatic components, solenoid valve control cylinder pull
the rope to complete the fire extinguisher rises, falls, cylinder out quickly, can complete a dro wire rope
loose.
4, collision frequency of vibration can be set: imported pneumatic components, cylinder reciprocating movement
to complete against performance of vibration test; System can be set vibration frequency, vibration frequency.
5, maximum load, maximum load 50 kg
6, collision frequency range: 0-1 hz (1 / s)
7, inlet pressure: 0.1 ~ 0.2 Mpa
8, the vibration to hit number: 0 ~ 999 times can be set, to set the number of automatic stop.
9, the power supply: AC220V 50 hz 0.5 kw
10, appearance size: length x width x height (mm) = 1000 * 500 * 500
本頁產品地址：http://m.521uz.com/sell/show-4361436.html
免責聲明：以上所展示的[ZY6505 滅火器振撞試驗機測試儀裝置]信息由會員[東莞中諾臺灣質檢儀器設備有限公司]自行提供，內容的真實性、準確性和合法性由發布會員負責。
