ZY6017C汽車內飾材料燃燒試驗機
Auto interior materials combustion testing machine
名稱 ：ZY6017C汽車內飾材料燃燒試驗機
詳細介紹 Detailed introduction
此機符合GB8410、美標FMVSS571.302、DIN7520《汽車內飾材料的燃燒特性》。將試樣水平地夾在U形支架上，在燃燒箱中用規
定高度火焰點燃試樣的自由端15S后，確定試樣上火焰是否熄滅，以及試樣燃燒的距離和燃燒該距離所用的時間。內飾材料包
括汽車內飾領件所用的單一材料或層積復合材料，如座墊、座椅靠背、座椅套、安全帶、頭枕、扶手、活動式折疊車頂、所有
裝飾性襯板、儀表板、雜物箱、室內貨物架板、或后窗臺板、窗簾、地板覆蓋物…..
This machine meet GB8410, FMVSS571.302, DIN7520 combustion characteristic of auto interior materials. The
sample clip on the u-shaped bracket horizontally, in the burning box gauge is used
Set the height of flame lit the free end of the sample after 15 s, determine whether the sample on the flame
extinguished, and sample distance and combustion the time required for the distance. Interior materials bag
Enclosed led automotive interior parts used in a single material or laminated composites, such as seat
cushion, seat, seat cover, seat belts, headrest, armrest, activity type folding roof, all
Decorative plate, instrument panel, glove box, indoor cargo plane board, or rear window bedplate, curtains,
floor coverings... ..
一、燃燒箱：Combustion cases:
1、鏡面不銹鋼板結構，鋼板厚度1.2mm
2、燃燒室尺寸：寬x高x深: 385x 360 204mm
3、底部有10個直徑為19mm的通風孔，四壁靠近頂部四周有寬13mm的通風槽。
4、試驗支架：由兩塊U形耐腐蝕的金屬鋼板制成，尺寸長x寬為361x100mm
1, mirror stainless steel structure, steel plate thickness of 1.2 mm
2, the size of the combustion chamber: width x height x deep: 385 x 360 x 204 mm
3, there are 10 19 mm diameter at the bottom of the hole, there are 13 mm wide near the walls near the top of
ventilation slots.
4, test support: the two pieces of u-shaped corrosion resistance of the metal steel plate, the size is 361
x100mm length x width
二、控制箱:Control box:
1、燃燒時間：0~99.99/S/M/H任意設定
2、停燃時間：燃燒時間：0~99.99/S/M/H任意設定
1, the burning time: 0 ~ 99.99 / S/M/H set arbitrary
2, stop burning time, burning time: 0 ~ 99.99 / S/M/H set arbitrary
三、燃燒燈：Burning lamp:
1、噴嘴內徑：9.5mm
2、氣源：煤氣（客戶自備）
3、火焰高度：38mm
1, the nozzle diameter: 9.5 mm
2, air supply: the gas () by advertisers
3, flame height: 38 mm
本頁產品地址：http://m.521uz.com/sell/show-4360005.html
免責聲明：以上所展示的[ ZY6017C 汽車內飾材料燃燒試驗機]信息由會員[東莞中諾臺灣質檢儀器設備有限公司]自行提供，內容的真實性、準確性和合法性由發布會員負責。
