ZY6017F建筑材料可燃性試驗機
Building materials flammability testing machine
1. 適用范圍：Scope of application:
適用于在規定條件下判斷建筑材料是否具有可燃性試驗方法。
Apply to under prescribed conditions to determine whether a building material with flammability test method.
2. 符合標準：Conform to the standard:
GB/T8626《建筑材料可燃性試驗方法》。
GB/T8626 building materials flammability test method.
3. 主要參數：The main parameters:
整套配置：本試驗機由控制箱、燃燒箱本體、燃燒器、電磁閥、高壓點火器、信號控制線及試樣支架 組成；
電源電壓：AC220V±10%，50Hz；
氣體純度：>95% 丙烷氣；（客戶自備）
放焰時間： 0 ~ 99 分 99 秒可設定；
持燃時間： 0 ~ 99 分 99 秒可設定；
燃燒器尺寸為： 燃燒器由孔徑為￠0.17mm 的噴嘴和調節閥組成， 并設有四個￠4mm 的空氣吸入孔；
火焰高度：20±2mm；
燃燒器傾角：45°；
點火系統：高壓電子點火，自動點火、復位；
A complete set of configuration: this machine is composed of control box, box body, burning burner,
electromagnetic valve, high pressure ignition, signal line and sample holder;
The power supply voltage: AC220V plus or minus 10%, 50 hz;
: gas purity > 95% propane gas; () by advertisers
Time to put a flame: 0 ~ 99 99 seconds can be set;
The burning time: 0 ~ 99 99 seconds can be set;
Burner size for: burner by the aperture of ￠0.17 mm of nozzle and regulating valve, and is equipped with four
￠air inlet hole of 4 mm;
Flame height: 20 plus or minus 2 mm;
Burner Angle: 45 °;
The ignition system: high pressure electronic ignition, automatic ignition and reset;
4. 設備結構：Equipment structure:
本機器結構由燃燒箱、控制箱，兩部份組成。
燃燒箱尺寸：L700*W400*H810（mm）
機箱材質：燃燒箱體采用優質(t=1.2mm)304不鋼板，數控機床加工成型，圓弧造型美觀大方。
控制箱采用優質(t=1.2mm)靜電鋼板，表面進行噴塑處理，更顯光潔、美觀。
噴燈：由我公司自制，黃銅材料，完全符合GB/T8626標準要求。
其它機械零件材質采用304不銹鋼或A3料加厚電鍍，防腐防銹。
采用板卡+微機控制，具有結構合理、性能穩定、操作簡便等優點。
WINDOWS XP操作界面、LabVIEW風格、完善的安全機制。測試期間實時顯示測量結果并動態地繪出曲線，數據可以保
存、調閱和打印輸出,可直接打印報表。
This machine structure is controlled by burning box, box, composed of two parts.
Combustion box size: W400 L700 * * H810 (mm)
Case material: combustion box body is made of high quality (t = 1.2 mm) 304 steel plate, the numerical control
machine tool processing molding, arc the beauty is generous.
Control box is made of high quality (t = 1.2 mm) electrostatic steel plate, surface coating processing, more
bright and clean and beautiful.
Blowtorch: made by my company, brass material, completely conform to the requirements of the standard
GB/T8626.
Materials using 304 stainless steel or other mechanical parts A3 material thickening plating, anticorrosion.
Board + microcomputer control, has the advantages of reasonable structure, stable performance, easy to
operate.
WINDOWS XP operating interface, LabVIEW style, perfect security mechanism. During testing real-time display
measurement results and dynamically draw perfect curve, the data can be stored permanently and read and print
output, can be directly printed statements.
本頁產品地址：http://m.521uz.com/sell/show-4359446.html
免責聲明：以上所展示的[ ZY6017F 建筑材料可燃性試驗機]信息由會員[東莞中諾臺灣質檢儀器設備有限公司]自行提供，內容的真實性、準確性和合法性由發布會員負責。
