EJX130A高靜壓差壓變送器
EJX130A型高性能高靜壓差壓變送器采用單晶硅諧振式傳感器技術，適用于液體、氣體或蒸汽的流量以及液位、密度和壓力測量。
多傳感器技術提供的診斷功能，可以檢測脈沖線路堵塞或伴熱管道的破損等異常。
EJX系列支持BRAIN、HART和FOUNDATION™現場總線通信協議。
規格
EJX130A高靜壓差壓變送器
M膜盒
H膜盒
測量范圍
-100~100kPa
(-400~400inH2O)
-500~500kPa
(-2000~2000inH2O)
測量量程
1~100kPa
(4~400inH2O)
5~500kPa
(20~2000inH2O)
精度
±0.04%
防護等級
IP67，NEMA 4X和JIS C0920防浸型
防爆規格
FM，CENELEC ATEX，CSA，IECEx
輸出信號
4~20mA DC或FOUNDATION™現場總線，兩線制數字通信
電源
BRAIN和HART: 10.5~42V DC
(本安型: 10.5~30V DC)
Fieldbus: 9~32V DC
(本安Entity模式9~24V DC，本安FISCO模式9~17.5V DC)
環境溫度
-40~85℃ (-40~185℉) (普通型)
-30~80℃ (-22~176℉) (內藏指示器)
過程溫度
-40~120℃ (-40~248℉) (普通型)
zui大工作壓力
32MPa(4500psi)
安裝
2-inch管安裝
接液部件材質
膜盒
316L SST(膜片: 哈氏合金C-276)
容室法蘭
316 SST
外殼
鋁合金或ASTM CF-8M不銹鋼(可選)
型號選型 4
Model
Suffix Codes
Description
EJA130A
. . . . . . . . . . .
Differential pressure transmitter
Output Signal
-D . . . . . . . . . . . . . . . . . . . . .
-E . . . . . . . . . . . . . . . . . . . . .
-F . . . . . . . . . . . . . . . . . . . . .
-G . . . . . . . . . . . . . . . . . . . . .
4 to 20 mA DC with digital communication (BRAIN protocol)
4 to 20 mA DC with digital communication (HART protocol, refer to GS 01C22T01-00E)
Digital communication (FOUNDATION Fieldbus protocol, refer to GS 01C22T02-00E)
Digital communication (PROFIBUS PA protocol, refer to GS 01C22T03-00E)
Measurement span(capsule)
M . . . . . . . . . . . . . . . . . . .
H . . . . . . . . . . . . . . . . . . .
1 to 100 kPa { 100 to 10000 mmH2O} { 4 to 400 inH2O} { 10 to 1000 mbar}
5 to 500 kPa { 0.05 to 5 kgf/cm2} { 20 to 2000 inH2O} { 50 to 5000 mbar}
Wetted parts material *7
S# . . . . . . . . . . . . . .
[Body] [Capsule] [Vent plug]
SUSF316 *1 SUS316L *2 SUS316 *8
Process connection
6
0 . . . . . . . . . . . . . . . . .
1 . . . . . . . .
2 . . . . . . . .
3 . . . . . . . .
4 . . . . . . . .
5 . . . . . . . .
without process connector (Rc 1/4 female on the cover flanges)
with Rc 1/4 female process connector
with Rc 1/2 female process connector
with 1/4 NPT female process connector *5
with 1/2 NPT female process connector *5
without process connector (1/4 NPT female on the cover flanges)
Bolts and nuts material
6
A . . . . . . .
B . . . . . . .
C . . . . . . .
[Maximum working pressure]
SCM435 32 MPa {320 kgf/cm2}
SUS630 32 MPa {320 kgf/cm2}
SUH660 32 MPa {320 kgf/cm2}
Installation
6
-2 . . . . . . . .
-3 . . . . . . . . . . . . . .
-6 . . . . . . . . . . . . . .
-7 . . . . . . . . . . . . . .
-8 . . . . . . . . . . . . . .
-9 . . . . . . . . . . . . . .
Vertical impulse piping type, right side high pressure, process connector upside*3
Vertical impulse piping type, right side high pressure, process connector downside*3
Vertical impulse piping type, left side high pressure, process connector upside*3
Vertical impulse piping type, left side high pressure, process connector downside*3
Horizontal impulse piping type, right side high pressure*4
Horizontal impulse piping type, left side high pressure*4
Electrical connection 6
0 . . . . . .
2 . . . . . . . . . . . . .
3 . . . . . . . . . . . . .
4 . . . . . . . . . . . . .
5 . . . . . . . . . . . . .
7 · · · · · · · · ·
8 · · · · · · · · ·
9 · · · · · · · ·
A · · · · · · · ·
C · · · · · · · · ·
D · · · ·
G1/2 female, one electrical connection
1/2 NPT female, two electrical connections without blind plug
Pg 13.5 female, two electrical connections without blind plug
M20 female, two electrical connections without blind plug
G1/2 female, two electrical connections and a blind plug
1/2 NPT female, two electrical connections and a blind plug
Pg 13.5 female, two electrical connections and a blind plug
M20 female, two electrical connections and a blind plug
G1/2 female, two electrical connections and a SUS316 blind plug
1/2 NPT female, two electrical connections and a SUS316 blind plug
M20 female, two electrical connections and a SUS316 blind plug
Integral indicator
6
D . . . . .
E . . . . .
N . . . . .
Digital indicator
Digital indicator with the range setting switch*6
(None)
Mounting bracket
A . . . . .
B . . . . .
J . . . . .
C . . . . .
D . . . . .
K . . . . .
N . . . . .
SECC Carbon steel 2-inch pipe mounting (flat type)
SUS304 2-inch pipe mounting (flat type)
SUS316 2-inch pipe mounting (flat type)
SECC Carbon steel 2-inch pipe mounting (L type)
SUS304 2-inch pipe mounting (L type)
SUS316 2-inch pipe mounting (L type)
(None)
Optional codes
/□ Optional specification
The ‘6’ marks indicate the most typical selection for each specification. Example: EJA130A-DMS-92NA/□
The ‘#’marks indicate the construction materials conform to NACE material recommendations per MR01-75. For the use of SUS316 material, there may be certain limitations for pressure and temperature. Please refer to NACE standards for details.
*1: Indicates material of cover flange. Material of process connector is SCS14A(SUS316 equivalent).
*2: Diaphragm material is Hastelloy C-276 or ASTM N10276. Other capsule wetted parts materials are SUSF316L, SUS316L or ASTM grade 316L.
*3: If necessary, specify Mounting bracket code C, D or K.
*4: If necessary, specify Mounting bracket code A, B or J.
*5: Lower limit of ambient and process temperature is —15°C.
*6: Not applicable for Output signal code F and G.
*7: Users must consider the characteristics of selected wetted parts material and the influence of process fluids. The use of inappropriate materials can result in the leakage of corrosive process fluids and cause injury to personnel and/or damage to plant facilities. It is also possible that the diaphragm itself can be damaged and that material from the broken diaphragm and the fill fluid can contaminate the user's process fluids.
Be very careful with highly corrosive process fluids such as hydrochloric acid, sulfuric acid, hydrogen sulfide, sodium hypochlorite, and high-temperature steam (150°C [302°F] or above). Contact Yokogawa for detailed information of the wetted parts material.
*8: SUS316 or ASTM grade 316.
本頁產品地址：http://m.521uz.com/sell/show-4097129.html
免責聲明：以上所展示的[EJX130A EJX130A高靜壓差壓變送器]信息由會員[西安西弘自動化設備有限公司]自行提供，內容的真實性、準確性和合法性由發布會員負責。
